The Ginger Swimsuit Sew Along: Adding a little support

Friday, August 10, 2012


If you are larger chested, you might find that you need some support under the cups to keep everything in place.  Before you sew your side seams, you might want to try adding a piece of 1/2" wide elastic onto your seam allowance, under your cups.  For those of you who followed the Oooh La La Sew Along, we'll be doing the exact same thing we did there!  This step is completely optional! 


See the yellow dashed lines? That's where I need some more support.  I am going to apply the elastic right along the seam allowance where the bust cups meet the body of the swimsuit.

Line your elastic up with the seam line, so that the excess of the elastic hangs over the seam allowance.  Using a long zig-zag stitch, make a couple of stitches through your elastic and your seam allowance to anchor the elastic.  As you sew, gently pull the elastic so you create just a LITTLE bit of tension.  We want the elastic to just hold the base of the cups closer to our bodies, we do not want to pull so tight that it shirrs the fabric.



When you get to the center, with the needle down, lift the presser foot, gently pivot, and continue on.  You could easily do the same thing by adding clear elastic into your seam line.


If you need some extra clarification on this step, Visit this Post, which talks about it in more depth.  Once you have zig-zagged the elastic on, you can top stitch with a zig-zag stitch, or twin needle, or just leave it loose. 

1 comment:

Note: Only a member of this blog may post a comment.

Blog Design by Nudge Media Design | Powered by Blogger